Save Water

The MultiCyclone is ideal as a pre-filter to extend the life of your existing filter. It will filter out up to 80% of the incoming sediment from your swimming pool or pond. The unit works together with a sand, cartridge or DE filter to polish the water. It allows the installation of finer filtration systems, such as cartridge filters with finer cartridges and the sand filters with finer filter media. Finer filtration systems can be installed without the burden of extra maintenance. The pool water ends up clearer with less up keep.

The unit is supplied with both 2”/63mm quick connect unions making this unit ideal for new installations and retrofit market.

The MultiCyclone has recently been shown at various International shows and has received rave reviews:

International Recognition:

• Awarded first prize in the sustainability category at the recent 2007 Piscina Barcelona International pool show.
• Awarded the Internationally recognized Smart Water Mark.
• Endorsed by the Save Water Alliance
• Recognised by the European Commission of Enviroment as being fully consistent with the priorities set up at European level.

Features and Benefits:

• Saves water through reducing backwashing ….. up to as much as 19,000 litres per year!! (This is based on a 20m3/hr pump and backwashing / rinsing for approx 3 ½ minutes twice a month and still taking into account that some backwashing may still be required depending upon the installation).
• The MultiCyclone is ideal as a pre-filter and will extend the life of any existing filter. It works together with sand, diatomaceous earth or cartridge filters, fitting between the pump and the existing filter.
• The MultiCyclone filters out up to 80% of the incoming sediment before entering the main filtration system. The end result is that the filter requires less cleaning, saves water, money and time.
• Ideally suited for both new pool installations and the retro fit market for existing pools. Quick and easy to install.
• A unique and innovative product allowing the installer to be able to offer their customer the latest in pre filtration technology.
• Supplied with both 2” and 63mm quick connect unions, a 1” purge valve and a 1”/32mm adaptor to cater for most installations.
• Has an operating range of 3m3/h to 30m3/h.
• With more homes every month being put on water meters more savings can be realised for the home owner.
• The 4 bar glass filled body is of a hydraulically efficient design ensuring maximum strength and durability resulting in years of trouble free operation.
• No media is required.
• No moving parts to go wrong.
• The large UV treated, clear polycarbonate inspection bowl makes it easy for the operator to know when the unit needs emptying.
• The multicyclone is perfectly suited when used in conjunction with pressure operated products such as gas heaters, electric heaters or heat pumps by taking the “work load” of the filter without affecting the flow rate of the installation. Unnecessary service calls are greatly reduced as a result of a “dirty” filter that was responsible for poor flow and a reduction in pressure within the system.
• In salt water pools a large percentage of salt is lost through the backwashing process and with the growing popularity of salt water chlorinators in the market the need for constant topping up of salt is therefore greatly reduced.
• 2 year full product warranty against manufacturing defects.
• On average only 15 litres of water is discharged to clean the MultiCyclone of sediment.
• The discharge line can be either plumbed into the waste line of the filter or emptied into a domestic bucket and then simply emptied on the garden.

The MultiCyclone is under world-wide patent pending.

Applications

Since the introduction of the MultiCyclone we have found that it caters for many more markets than just the swimming pool industry. Recent installations have included the following (not to mention dog washes and horse training pools!!) and all with fantastic results:

Cooling Towers

The MultiCyclone combined with an automated filtration skid. The MultiCyclone used in conjunction with a Waterco Trimline bag filter (TBF) / Trimline cartridge filter – reduces filter maintenance, reduces loss of cooling water and drastically reduces the loss of chemicals.

Koi Ponds

Installed prior to a bead filter as a sediment removal system to reduce backwashing and loss of pond water or directly afterwards to act as an inline “polishing” unit

Commercial swimming pools

Used as a pre filter to commercial filters – large savings in water and loss of chemicals.

The Portable Vacuum System

The MultiCyclone combined with a pump and cartridge filter plumbed on a mobile filter system with vacuum and hose. The MultiCyclone will help to reduce filter maintenance and costly filter replacement for the service technician.

Aquaculture, shell fish

Helps to remove sand and sediment from aquaculture water.

Water recycling systems

Pre filters to granular filters in water recycling systems, reduction in filter maintenance and down time for backwashing.

Reverse Osmosis

Pre-filtration to coarse filtration of commercial reverse osmosis systems.